侧喷孔分布对多股燃气射流在充液室中扩展特性的影响

赵嘉俊, 余永刚

赵嘉俊, 余永刚. 侧喷孔分布对多股燃气射流在充液室中扩展特性的影响[J]. 工程力学, 2017, 34(7): 241-248. DOI: 10.6052/j.issn.1000-4750.2016.01.0074
引用本文: 赵嘉俊, 余永刚. 侧喷孔分布对多股燃气射流在充液室中扩展特性的影响[J]. 工程力学, 2017, 34(7): 241-248. DOI: 10.6052/j.issn.1000-4750.2016.01.0074
ZHAO Jia-jun, YU Yong-gang. EFFECTS OF THE DISTRIBUTION OF LATERAL ORIFICES ON EXPANSION OF MULTIPLE COMBUSTION GAS JETS IN WATER-FILLED CHAMBER[J]. Engineering Mechanics, 2017, 34(7): 241-248. DOI: 10.6052/j.issn.1000-4750.2016.01.0074
Citation: ZHAO Jia-jun, YU Yong-gang. EFFECTS OF THE DISTRIBUTION OF LATERAL ORIFICES ON EXPANSION OF MULTIPLE COMBUSTION GAS JETS IN WATER-FILLED CHAMBER[J]. Engineering Mechanics, 2017, 34(7): 241-248. DOI: 10.6052/j.issn.1000-4750.2016.01.0074

侧喷孔分布对多股燃气射流在充液室中扩展特性的影响

基金项目: 国家自然科学基金项目(11372139)
详细信息
    作者简介:

    赵嘉俊(1990-),男,湖南娄底人,博士生,主要从事多相流数值计算研究(E-mail:njustzhaojiajun@126.com).

    通讯作者:

    余永刚(1963-),男,江苏南京人,教授,工学博士,博导,主要从事含能材料燃烧和推进技术研究(E-mail:yygnjust801@163.com).

  • 中图分类号: TJ55;O358

EFFECTS OF THE DISTRIBUTION OF LATERAL ORIFICES ON EXPANSION OF MULTIPLE COMBUSTION GAS JETS IN WATER-FILLED CHAMBER

  • 摘要: 该文对火药燃烧形成的多股高压燃气射流从模拟弹头头部喷入柱形充液室的过程进行了数值研究。采用雷诺平均N-S方程结合可实现k-ε湍流模型来描述单个中心泰勒空腔和多个侧面泰勒空腔在受限液体环境中的扩展过程,同时分析了侧面喷孔个数对燃气扩展的影响。数值结果表明,减少侧面喷孔的个数,泰勒空腔的剖面形状并未发生明显变化,相邻侧面泰勒空腔的汇聚过程变慢,泰勒空腔充满充液室的时间增加。侧面喷孔的个数减少,泰勒空腔内部的静压趋于稳定,流场内径向截面的平均总压降低。
    Abstract: The injection of multiple high-pressure combustion gas jets which is developed by the combustion of powder in a cylindrical water-filled chamber is numerically studied. The Reynolds average Navier-Stokes equations and the k-ε realizable turbulent model are adopted to describe the expansion of a single central Taylor cavity and several lateral Taylor cavities in this limited water environment. The effects of the number of lateral orifices on the gas expansion are discussed. The numerical results show that, when the number of lateral orifices decreases, the shape of Taylor cavities on the section in axial direction has no significant change, but the convergence of adjacent lateral Taylor cavities appears later and the time of Taylor cavities to fill the chamber increases. With a decreasing number of lateral orifices, the static pressure in Taylor cavity tends to be stable and the average total pressure on the section in radial direction decreases.
  • [1] Ceccio S L. Friction drag reduction of external flows with bubble and gas injection[J]. Annual Review of Fluid Mechanics, 2010, 42:183-203.
    [2] Yagla J J, Busic J, Koski S, et al. Launch dynamics environment of a water piercing missile launcher[C]//24th International Symposium on Ballistics. New Orleans, Louisiana, 2008:1-17.
    [3] 施红辉, 汪剑锋, 陈帅, 等. 水下超声速气体射流初期流场特性的实验研究[J]. 中国科学技术大学学报, 2014, 44(3):233-237. Shi Honghui, Wang Jianfeng, Chen Shuai, et al. Experimental study on flow characteristics at the initial injection stage of underwater supersonic gas jets[J]. Journal of University of Science and Technology of China, 2014, 44(3):233-237. (in Chinese)
    [4] Vivaldi D, Gruy F, Simon N, et al. Modelling of a CO2-gas jet into liquid-sodium following a heat exchanger leakage scenario in sodium fast reactors[J]. Chemical Engineering Research and Design, 2013, 91(4):640-648.
    [5] Weiland C, Vlachos P P. Round gas jets submerged in water[J]. International Journal of Multiphase Flow, 2013, 48:46-57.
    [6] Harby K, Chiva S, Muñoz-Cobo J L. An experimental investigation on the characteristics of submerged horizontal gas jets in liquid ambient[J]. Experimental Thermal and Fluid Science, 2014, 53:26-39.
    [7] 唐嘉宁, 李世鹏, 王宁飞. 水下固体火箭发动机的负推力现象研究[J]. 固体火箭技术, 2012, 35(3):325-329, 343. Tang Jianing, Li Shipeng, Wang Ningfei. Study of the negative thrust of the underwater solid rocket engines[J]. Journal of Solid Rocket Technology, 2012, 35(3):325-329, 343. (in Chinese)
    [8] 陈焕龙, 王柠, 刘华坪, 等. 不同发射深度下喷管燃气射流特性研究[J]. 水动力学研究与进展A辑, 2012,27(6):659-666. Chen Huanlong, Wang Ning, Liu Huaping, et al. Investigation of nozzle gas jet characteristics with different launch depth underwater[J]. Chinese Journal of Hydrodynamics, 2012, 27(6):659-666. (in Chinese)
    [9] 曹伟, 刘海军, 王聪. 射流速度对气幕发射方式下航行体运动过程的影响研究[J]. 工程力学, 2012, 30(9):288-292. Cao Wei, Liu Haijun, Wang Cong. The effect of gas jet speed on the motion process of the underwater vehicle vertical launching by using gas curtain[J]. Engineering Mechanics, 2013, 30(9):288-292. (in Chinese)
    [10] 刘海军, 王聪, 彭兴芝, 等. 水下航行体垂直发射过程气幕形态特性研究[J]. 哈尔滨工业大学学报, 2013, 45(5):7-12. Liu Haijun, Wang Cong, Peng Xingzhi, et al. Shape characteristics of gas screen of underwater vehicle vertical launch[J]. Journal of Harbin Institute of Technology, 2013, 45(5):7-12. (in Chinese)
    [11] Arghode V K, Gupta A K. Jet characteristics from a submerged combustion system[J]. Applied Energy, 2012, 89(1):246-253.
    [12] 王亚东, 袁绪龙, 张宇文. 潜射导弹空化特性水洞模型试验研究[J]. 工程力学, 2013, 30(4):442-447. Wang Yadong, Yuan Xulong, Zhang Yuwen. Experimental investigation of cavitation characteristics of sub-launched missile models in water tunnel[J]. Engineering Mechanics, 2013, 30(4):442-447. (in Chinese)
    [13] 王一伟, 黄晨光, 吴小翠, 等. 航行体水下垂直发射空泡脱落条件研究[J]. 工程力学, 2015, 32(11):33-39. Wang Yiwei, Huang Chenguang, Wu Xiaocui, et al. Investigation of cavities shedding condition on underwater vehicles in the vertical launch process[J]. Engineering Mechanics, 2015, 32(11):33-39. (in Chinese)
    [14] Nouri N M, Madoliat R, Jahangardy Y, et al. A study on the effects of fluctuations of the supercavity parameters[J]. Experimental Thermal and Fluid Science, 2015, 60:188-200.
    [15] Xu W, Lai Z, Wu D, et al. Acoustic emission characteristics of underwater gas jet from a horizontal exhaust nozzle[J]. Applied Acoustics, 2013, 74(6):845-849.
    [16] Hao Z R, Zhou Z H. Experimental studies on the effects of nozzle structures on characteristics of submerged gas jet noise[J]. Applied Mechanics and Materials, 2012, 204/205/206/207/208:4620-4623.
    [17] 姚琰, 鲁传敬, 朱坤. 水下高速气体射流的实验研究[J]. 水动力学研究与进展A辑, 2009, 24(5):590-595. Yao Yan, Lu Chuanjing, Zhu Kun. Experimental study on confined high-speed gas jets in water[J]. Journal of Hydrodynamics Ser. A, 2009, 24(5):590-595. (in Chinese)
    [18] 曹嘉怡, 鲁传敬, 李杰, 等. 潜射导弹水下垂直自抛发射过程研究[J]. 水动力学研究与进展A辑, 2006, 21(6):752-759. Cao Jiayi, Lu Chuanjing, Li Jie, et al. Research on the vertical launching of direct ignition underwater missile[J]. Journal of Hydrodynamics Ser. A, 2006, 21(6):752-759. (in Chinese)
    [19] 莽珊珊, 余永刚. 高压燃气射流在整装液体中扩展过程的实验和数值模拟[J]. 爆炸与冲击, 2011, 31(3):300-305. Mang Shanshan, Yu Yonggang. Experiment and numerical simulation for high pressure combustible gas jet expansion process in a bulk-Loaded liquid[J]. Explosion and Shock Waves, 2011, 31(3):300-305. (in Chinese)
    [20] 薛晓春, 余永刚, 张琦. 双束燃气射流与整装式液体装药相互作用的实验和数值模拟[J]. 兵工学报, 2013, 34(6):669-677. Xue Xiaochun, Yu Yonggang, Zhang Qi. Experiment and numerical simulation for interaction of twin gas gets and bulk-loaded liquid charge[J]. Acta Armamentarii, 2013, 34(6):669-677. (in Chinese)
    [21] Xue X, Yu Y, Zhang Q. Study on the influences of interaction behaviors between multiple combustion-gas jets on expansion characteristics of taylor cavities[J]. Acta Mechanica Sinica, 2015, 31(5):720-731.
    [22] Evgenevna I E, Evgenevna I T, Viktorovich B P. Analysis of the application of turbulence models in the calculation of supersonic gas jet[J]. American Journal of Applied Sciences, 2014, 11(11):1914-1920.
  • 期刊类型引用(6)

    1. 张学民,张欣尉,余永刚. 直沟槽与螺旋沟槽排水结构对水下炮气幕演化特性的影响分析. 含能材料. 2023(12): 1235-1244 . 百度学术
    2. 王雨舒,吕续舰. 水下枪炮发射问题研究综述. 装备环境工程. 2022(05): 1-13 . 百度学术
    3. 孟祥宇,侯健,秦一平,廖斐,鲁春佳. 枪弹间隙对水下枪内弹道的影响. 高压物理学报. 2020(03): 145-157 . 百度学术
    4. 何福,张建峰,戴劲松,王茂森. 基于空化原理的水下降压腔仿真分析. 兵器装备工程学报. 2020(08): 11-16 . 百度学术
    5. 胡雨博,余永刚. 充液圆管周向多股壁面燃气射流排水特性. 兵工学报. 2020(12): 2417-2423 . 百度学术
    6. 陈璐,薛晓春. 圆柱型边界条件下多股燃气射流扩展形态的数值模拟. 弹道学报. 2019(02): 30-34 . 百度学术

    其他类型引用(5)

计量
  • 文章访问数:  265
  • HTML全文浏览量:  26
  • PDF下载量:  66
  • 被引次数: 11
出版历程
  • 收稿日期:  2016-01-24
  • 修回日期:  2016-09-29
  • 刊出日期:  2017-07-24

目录

    Corresponding author: YU Yong-gang

    1. On this Site
    2. On Google Scholar
    3. On PubMed

    /

    返回文章
    返回