斜拉桥桥塔钢-混凝土结合段传力机理试验研究

卫 星, 强士中

卫 星, 强士中. 斜拉桥桥塔钢-混凝土结合段传力机理试验研究[J]. 工程力学, 2013, 30(1): 255-260,313. DOI: 10.6052/j.issn.1000-4750.2011.06.0351
引用本文: 卫 星, 强士中. 斜拉桥桥塔钢-混凝土结合段传力机理试验研究[J]. 工程力学, 2013, 30(1): 255-260,313. DOI: 10.6052/j.issn.1000-4750.2011.06.0351
WEI Xing, QIANG Shi-zhong. SPECIMEN TEST FOR MECHANICS BEHAVIOR OF STEEL-CONCRETE COMPOSITE JOINT IN PYLON OF CABLE-STAYED BRIDGE[J]. Engineering Mechanics, 2013, 30(1): 255-260,313. DOI: 10.6052/j.issn.1000-4750.2011.06.0351
Citation: WEI Xing, QIANG Shi-zhong. SPECIMEN TEST FOR MECHANICS BEHAVIOR OF STEEL-CONCRETE COMPOSITE JOINT IN PYLON OF CABLE-STAYED BRIDGE[J]. Engineering Mechanics, 2013, 30(1): 255-260,313. DOI: 10.6052/j.issn.1000-4750.2011.06.0351

斜拉桥桥塔钢-混凝土结合段传力机理试验研究

基金项目: 国家自然科学基金项目(50808150);西南交通大学竢实之星项目(swjtu-sszx2008)
详细信息
  • 中图分类号: U441.4

SPECIMEN TEST FOR MECHANICS BEHAVIOR OF STEEL-CONCRETE COMPOSITE JOINT IN PYLON OF CABLE-STAYED BRIDGE

  • 摘要: 绵阳城南新区一号桥斜拉桥采用钢-混凝土组合索塔,上钢塔与下混凝土塔之间的内力传递主要是通过承压板、PBL剪力键实现。介绍了钢-混凝土组合索塔在斜拉桥中的应用,分析主塔钢混结合段的受力及构造特点的基础上,采用1∶3缩尺比例,按照几何条件、物理条件以及边界条件相似原则对结合段进行了模型试验。考虑承载能力极限状态荷载组合对试验模型进行加载,测试了试验模型的控制断面和控制构件的应力、变形随加载历程的变化形态,得到了结合段的应力状态、钢与混凝土的相对滑移等性能参数;将模型试验与有限元分析相结合,分析了结合段的传力机理及传力性能,得到结合段PBL剪力键及承压板荷载分配关系。
    Abstract: With a steel-concrete composite joint in pylon, No.1 Bridge is located at the new district south of Mianyang City. Load is transferred between steel and concrete pylon by bearing plate and PBL shear connector. The application of steel-concrete composite pylon in cable-stayed bridge was introduced. The structure characteristics and mechanics behavior of steel-concrete composite pylon were investigated. Based on analogical principle in geometry physics and restriction condition, specimen test of steel-concrete composite joint of the pylon was carried out. With loads exerted according to the ultimate limit state, the stress and deformation of some members of the steel-concrete composite joint were tested. The stress state of steel-concrete composite joint and the slippage between steel and concrete member were obtained. Combining theoretical analysis with the result obtained from the model test, the mechanics behavior of the steel-concrete composite joint was analyzed and the load distribution between PBL shear connector and bearing plate were obtained.
  • [1] 严国敏. 现代斜拉桥[M]. 成都: 西南交通大学出版社, 1995: 32―52.
    Yan Guomin. Modern cable-stayed bridge [M]. Chengdu: Southwest Jiaotong University Press, 1995: 32―52. (in Chinese)
    [2] 苏庆田, 刘玉擎, 曾明根. 苏通大桥索塔栓钉剪力连接件的力学性能试验[J]. 同济大学学报(自然科学版), 2008, 36(7): 916―920.
    Su Qingtian, Liu Yuqing, Zeng Minggen. Experiments on stud shear connectors in cable-pylon of Sutong Bridge [J]. Journal of Tongji University (Natural Science), 2008, 36(7): 916―920. (in Chinese)
    [3] 王勇. 杭州湾跨海大桥工程总结[M]. 北京: 人民交通出版社, 2008: 600―640.
    Wang Yong. Summarization of Hangzhou Bay Cross-sea Bridge [M]. Beijing: China Communications Press, 2008: 600―640. (in Chinese)
    [4] 张勇. 南京长江第三大桥桥塔钢混结合段结构特性研究[D]. 成都: 西南交通大学, 2005.
    Zhang Yong. Research on the structural characteristics of steel-concrete composite segment in the tower of Nanjing Yangtse 3RD Bridge [D]. Chengdu: Southwest Jiaotong University, 2005. (in Chinese)
    [5] 张清华, 李乔, 唐亮. 桥塔钢-混凝土结合段剪力键破坏机理及极限承载力[J]. 中国公路学报, 2007, 20(1): 85―90.
    Zhang Qinghua, Li Qiao, Tang Liang. Fracture mechanism and ultimate carrying capacity of shear connectors applied for steel-concrete joint segment of bridge pylon [J]. China Journal of Highway and Transport, 2007, 20(1): 85―90. (in Chinese)
    [6] 肖林. 钢混组合结构中剪力连接件试验研究[D]. 成 都: 西南交通大学, 2008.
    Xiao Lin. Research and model test of shear connector in the steel-concrete composite structure [D]. Chengdu: Southwest Jiaotong University, 2008. (in Chinese)
    [7] Oguejiofor E C, Hosain M U. Behavior of perfobond rib shear connectors in composite beams: Full-size tests [J]. Canadian Journal of Civil Engineering, 1992, 19(2): 224―235.
    [8] J da C. Vianna, L F Costa-Neves, P C da S Vellascoc, S A L de Andrade. Experimental assessment of perfobond and T-perfobond shear connectors structural response [J]. Journal of Constructional Steel Research, 2009, 65(2): 408―421.
    [9] 保坂鉄矢, 光木香, 平城弘一, 牛島祥貴. 孔あき鋼板ジベルのせん断強度評価式と設計法に関する研究[J].構造工学論文集, 2002, 48A(3): 1265―1272.
    Hosaka T, Kaoru M, Hirokazu I. Study on shear strength equations and design method of perfobond strip [J]. Japanese Journal of Structural Engineering, 2002, 48A(3): 1265―1272. (in Japanese)
    [10] 肖林, 李小珍, 卫星. PBL剪力键静载力学性能推出试验研究[J]. 中国铁道科学, 2010, 31(3): 15―21.
    Xiao Lin, Li Xiaozhen, Wei Xing. Research on the static load mechanical properties of PBL shear connectors’ push-out test [J]. China Railway Science, 2010, 31(3): 15―21. (in Chinese)
    [11] 西南交通大学. 绵阳城南新区一号桥桥塔钢-砼结合段试验研究报告[R]. 成都: 西南交通大学, 2010.
    Southwest Jiaotong University. Report of steel-concrete composite joint in pylon of No.1 Bridge at South in Mianyang City [R]. Chengdu: Southwest Jiaotong University, 2010. (in Chinese)
计量
  • 文章访问数:  618
  • HTML全文浏览量:  23
  • PDF下载量:  385
  • 被引次数: 0
出版历程
  • 刊出日期:  2013-01-24

目录

    /

    返回文章
    返回